Page 29
Function Buttons
Remote Control
and App
Instructions
TIMER OFF
Sets timer to turn unit off
(see How to Use Basic
Functions for instructions).
Turns indoor unit’s LED display and
air conditioner buzzer on and off
(model dependent), which create a
comfortable and quiet environment.
FAN SPEED
SWING
Starts and stops the horizontal
louver movement.
ON/OFF
SET
Turns the unit on or off.
MODE
OK
LED
Scrolls through operation modes
as follows:
AUTO
COOL
DRY
HEAT FAN
TIMER ON
Increases temperate in
1°F (1°C) increments.
Max. temperature is
86°F (30°C).
TEMP
TEMP
Used to confirm the selected
functions
Decreases temperature
in 1°F(1°C) increments.
Min. temperature is
60°F(16°C).
Scrolls through operation
functions as follows:
( )
C SENSE ( )
AP mode( ) Sleep...
The selected symbol will
flash on the display area,
press the OK button to
confirm.
Sets timer to turn unit
on (see How to Use Basic
Functions for instructions).
°C/°F
The temperature display
between the °C & °F.
ENERGY SAVER
Press this button to activate the
Energy saving mode. Press it
again to stop the funtion.
AUTO LOW
MED HIGH
Selects fan speeds in
the following order:
NOTE: Please do not select
HEAT mode if the machine you
purchased is cooling only type.
Heat mode is not supported by
the cooling only appliance.
MShield
Used to starts and stops the
MShield feature.
Sleep
To Next Page
Loading...
