Midea MAW15R1BWT - Electronic Control (MAW05 R1)

Page 12
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control alone or with the remote controller.
TO TURN UNIT ON OR OFF:
Press
ON/OFF button to turn
unit on or off.
TO CHANGE TEMPERATURE
SETTING:
Press
UP ( )/DOWN ( ) button
to change temperature setting.
NOTE
The unit will automatically
initiate the Energy Saver
function under Cool, Dry, Auto
(only Auto-Cooling and Auto-
Fan) modes.
NOTE
Press or hold either UP ( )/
DOWN (
) button until the
desired temperature is seen on
the display.
This temperature will be
automatically maintained
anywhere between 62°F (17°C)
and 86°F (30°C). If you want
to display the actual room
temperature, see To Operate on
Fan Only section.
TO ADJUST FAN SPEEDS:
Press
to select the Fan Speed
in four steps-Auto, Low, Med or High.
Each time the button is pressed,
the fan speed mode is changed. On
Dry mode, the fan operates on Low
speed automatically.
Air Conditioner Features - MAW05R1
UNIT CONTROL
Operating
Instructions
CHECK FILTER
RESET
BUTTON
ENERGY
SAVER MODE
SETS FAN
SPEED
DISPLAYS
TEMPERATURE
OR TIME OR
ERROR CODES
SLEEP MODE
SETS MODE
TURNS UNIT
ON OR OFF
ADJUSTS
TEMPERATURE
OR TIME
ACTIVATES
TIMER
ADJUSTS
TEMPERATURE
OR TIME