III. OPERATION INSTRUCTIONS
Make sure the air vents are not blocked and keep utensils
away from the immediate surrounds of the ceramic plate.
Make sure the cookware which has food or liquid is
placed in the center of ceramic plate.
Put the pot on the ceramic plate
Plug in
Turn on
After pressing the “ON/STANDBY” button, the induction
cooker is ready for heating. Press the “Function” button,
the induction cooker enters heating mode.
After pressing the “ON/STANDBY” button, if no function
button is pressed for 10 seconds, the induction cooker
will switch off automatically.
After pressing the function button, if there is no proper
pot on the ceramic plate, the induction cooker will not
heat up and the alarm will sound to indicate that a pot is
required. One minute later, it will switch off automatically.
Function
After switching on the induction cooker, press “Function”
button to enter the temperature or level mode.
You can adjust the power level by pressing “+” or “-”
button.
You can adjust the temperature by pressing “+” or “-”
button.
After the power supply is connected, a beep will be
heard. The display shows “L”, indicating that the
induction cooker is in standby mode.
To Next Page
Loading...
Need help?
General
