Indicators on LCD
Fan speed indication
Mode display
Information are displayed when
the remote controller is powered
up.
Displayed when data transmitted.
Displayed when remote controller is ON.
Not available for this unit.
Battery display(low battery detection)
Displayed in ECO mode operation
Low speed
Medium speed
High speed
Auto fan speed
Note:
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
All indicators shown in the figure are for the purpose
Displayed when TIMER ON time is set.
Displayed in Sleep Mode operation.
Not available for this unit.
Displayed Self clean when select feature
Displayed when Comfort feature select
Displayed when Silent feature is activated
Indicated that the air conditioner is
operating in Follow me mode
Displayed when select Fresh feature
Displayed when TIMER OFF time is set.
Show set temperature or room
temperature, or time under TIMER setting.
5
6
AUTO
COOLAUTO
DRY HEAT FAN
1
2
4
5
3
9
10
11
12
13
8
6
7
Temp
Mode Fan
OK
Timer
ECO
Turbo LED
Fav.
Options
RG70F/BGEF
( Indicate optional functions)
SELF CLEAN function( )
Under SELF CLEAN mode, the air
conditioner will automatically clean and
dry the Evaporator and keep it as fresh
for the next operation. It is not available
under heating or fan mode.
Fav.Button
Used to restore the current settings or resume
previous settings.
On the first time connecting to the power,
if push the Fav. button, the unit will operate on
O
AUTO mode, 26 C, and fan speed is Auto.
Push this button when remote controller is
on, the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature(if activated).
If pushing more than 2 seconds, the system
will automatically restore the current operation
settings including operating mode, setting
temperature, fan speed level and sleep
feature(if activated ).
13
NOTE:
Buttons design is based on typical model
and might be slightly different from the
actual one you purchased，the actual
shape shall prevail.
All the functions described are
accomplished by the unit. If the unit has no
this feature, there is no corresponding
operation happened when press the
relative button on the remote controller.
When there are wide differences between
Remote controller Illustration and
USER'S MANUAL on function description,
the description of USER'S MANUAL
shall prevail.
,,
,,
,,
,,
,,
,,
To Next Page
Loading...
Need help?
General
