MCD1-24HRFN1-MT0W(GA)
A. Micro-switch SW1 is for selection of indoor fan stop temperature (TEL0) when it is in anti-cold wind
action in heating mode.
Range: 24
o
C, 15
o
C, 8
o
C, according to EEROM setting (reserved for special customizing).
B. Micro-switch SW2/SW2-1 is for selection of indoor FAN ACTION if room temperature reaches the
setpoint and the compressor stops.
Range: OFF (anti-cold wind is available in heating mode), keep running (No anti-cold wind function).
To Next Page
Loading...
