EN-11
(The picture above is only for reference.The actual configuration will depend on the physical product
or statement by the distributor)
8)After completing the installation
7)Install the door of freezer on the middle hinge, take out the left upper hinge and the cover for the left
upper hinge from the accessory bag, install the left hinge and tighten the screws, install the cover for
the left upper hinge and tighten the screw, install the right sensor in the original left hole cover, and
then fix the hole cover on the right box.
Left upper hinge
Cover for the left upper hinge
Hole cover
Sensor
To Next Page
Loading...
Need help?
General
