To Next PageTo Next PageWhat to do if Midea Air Conditioner displays outdoor temperature sensor T4 error?
If your Midea Air Conditioner is displaying an error related to the outdoor temperature sensor T4, test or replace the outdoor temperature sensor T4.
How to fix Midea Air Conditioner condenser coil temperature sensor T3 error?
To fix an error related to the condenser coil temperature sensor T3 on your Midea Air Conditioner, test or replace the condenser coil temperature sensor T3.
What does it mean when Midea Air Conditioner shows compressor discharge temperature sensor T5 error?
If your Midea Air Conditioner displays an error indicating an open or short circuit in the compressor discharge temperature sensor T5, test or replace the compressor discharge temperature sensor T5.
How to troubleshoot Midea MEHS-22NIH2 evaporator coil temperature sensor T2 issues?
To troubleshoot issues with the evaporator coil temperature sensor T2 on your Midea Air Conditioner, test or replace the evaporator coil temperature sensor T2.
What should I do if Midea MEHS-22NIH2 Air Conditioner shows indoor room temperature sensor T1 error?
If your Midea Air Conditioner is showing an error related to the indoor room temperature sensor T1, test or replace the room temperature sensor T1.
What to do if Midea MEHS-22NIH2 indicates IPM malfunction or IGBT over-strong current protection?
If your Midea Air Conditioner indicates an IPM malfunction or IGBT over-strong current protection, inspect the IPM and IGBT for faults.
How to resolve Midea Air Conditioner outdoor unit EEPROM parameter error?
To resolve an EEPROM parameter error on the outdoor unit of your Midea Air Conditioner, check the outdoor unit EEPROM parameters and reset if necessary.
How to fix Midea Air Conditioner indoor unit EEPROM parameter error?
To fix an EEPROM parameter error on the indoor unit of your Midea Air Conditioner, check the EEPROM parameters and reset if necessary.
General| Refrigerant | R410A |
|---|---|
| Type | Split |
| Inverter | Yes |
| Power Supply | 220-240V, 50Hz |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -7°C to 24°C |
| Cooling Capacity | 22000 BTU/h |
General safety guidelines to prevent injury and property damage.
Critical warnings and precautions related to installation, operation, and potential hazards.
Lists error codes (E0-E5, EC, P0-P4) displayed on the indoor unit and their meanings.
Provides diagnostic steps and solutions for specific error codes like E0/F4 and E1.
Troubleshooting guide for EC error related to refrigerant leakage detection.
Diagnostic steps for P0 error related to IPM or IGBT over-current protection.
Troubleshooting guide for P1 error related to voltage protection issues.
Diagnostic steps for P2 error related to compressor top high-temperature protection.
