8. Electronic function
8.1 Abbreviation
T1: Indoor room temperature
T2: Coil temperature of evaporator
T3: Coil temperature of condenser
T4: Outdoor ambient temperature
TP: Compressor discharge temperature
8.2 Display function
8.2.1 Icon explanation on indoor display board.
Digital display:
Displays the temperature settings when the air
conditioner is operational.
Displays the room temperature in FAN mode.
Displays the self-diagnostic codes.
Dispalys ‘ ’ for three seconds when Timer
ON, Fresh, Swing, Turbo or Silence feature is
activated.
Dispalys ‘ ’ for three seconds when Timer
OFF is set.
Dispalys ‘ ’ for three seconds when Fresh,
Swing, Turbo or Silence feature is cancelled.
Dispalys ‘ ’ under deforsting operation.
Dispalys ‘ ’ when anti-cold air feature is
activated under heating mode.
Dispalys ‘ ’ during self clean operation (if
aplicable).
Dispalys ‘ ’ under 8℃ heating operation (if
aplicable).
When ECO function(optional) is actived,the
“ ” illuminates gradually one by one as
In one second interval.
WIFI control display(optional)
Displays when the WIFI control feature is
actived. (Not available when the unit does not
have this function)
NOTE:
A guide on using the infrared remotr is included
in this literature package.
To Next Page
Loading...
Need help?
General
