Door handle installation
List of tools fo be provided by the user
step
Screw hole cover
Screw
Screw hole cover
Screw hole
ATTENTION
06
Cross screwdriver
1. Remove the screw hole caps from the door, and use cross screwdriver
to fix screw into the screw hole tightly.
2. Assemble the screw hole caps on the screw hole of handle.
3. The reverse operation is of disassembly.
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.
Precautions shall be taken to prevent fall of the handle from causing any personal injury.
EN
To Next Page
Loading...
