43
Procedures to turn off the wireless network function.
1. Press [ Temp. ] 3 seconds to turn off the wireless network function.
Procedures to turn on the wireless network function
1. Press [ ] 3 seconds to turn on the wireless network function.
Procedures to reset the wireless network configuration.
1. Press [ ] 3 seconds to turn on the wireless network function and re-
enter the network configuration process.
2. “AP” will be displayed on the knob display.
3. Reconnect to the network based on the content of previous page.
7 SMART FUNCTION
Notes
Wireless Network Status Light
Slowly flashing
Waiting for connection
Quickly flashing
Connecting
Quickly flashing solid
Connected to your wireless router
Make sure your devices are powered on.
Keep your mobile phone close enough to your device when you are
connecting network to your device.
Connect your mobile phone to the wireless network at home, and
make sure you know the password of the wireless network.
Check if your router supports 2.4 GHz wireless network band and turn
it on. If you are not sure whether the router supports 2.4 GHz band,
please contact the router manufacturer.
The device cannot connect to the wireless network that requires
authentication, and it usually appears in public area such as hotels,
restaurants, etc. Please connect to a wireless network that does not
require authentication.
It is recommended to use a wireless network name that only contains
letters and numbers. If your wireless network name contains special
characters, please modify it in the router.
Turn off the WLAN+ (Android) or WLAN Assistant (iOS) function of
your mobile phone when connecting network to your devices.
In the case that your device connected to wireless network before but
it needs to reconnect, please click "+" on app Home page, and add
your device again by the device category and model according to the
instructions on app.
To Next Page
Loading...
