35
Possible reason SolutionProblem
The Rapid light
flicker fleetly
The Rapid, 90min
light flicker fleetly
The ECO light
flicker fleetly
The HygieneCare+,
ECO and Rapid
light
Faucets is not opened, or water
intake is restricted, or water
pressure is too low.
Not reaching required
temperature.
Malfunction of heating element.
Overflow. Some element of dishwasher leaks.
Failure of communication
between main circuit board
with display circuit board.
Open circuit or break wiring for
the communication
Longer inlet time.
●
●
●
●
ERROR CODES
If there is a malfunction the dishwasher will display an error code. The following table
shows possible error codes and their causes.
●
●
●
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water should
be removed before restarting the dishwasher.
If there is an error code that cannot be solved, please request professional assistance.
WARNING
To Next Page
Loading...
Need help?
General
