Midea MID45S201-HR - Decorative Panel Installation

2.If you install the washing machine in the corner of the element, leave
room for opening the door.
Washing machine
vessel
Element
Door
washing machines
Minimum distance
of 50 mm
REMARK:
Depending on where your electrical outlet is located, you may need to cut a hole on the
opposite side of the element.
Step 2 Dimensions and placement of the decorative panel
Follow the specific installation instructions for attaching the decorative
door panel.
Semi-built-in model
Separate the velcro strip A and the velcro strip B and attach the velcro strip A to the inside of the decorative
panel. Attach the velcro strap with loops B to the outside of the dishwasher door (picture A).After installing
the panel, fasten it to the door of the washing machine with screws (picture B).
AND
1. Remove the four short screws
Velcro strap
(Velcro stripe)
B
Velcro strap
(Velcro stripe)
2. Insert four long screws
22