To Next PageTo Next PageWhy Midea MLE27N4AWWC doesn't heat?
If your Midea Dryer isn't heating, first check your home's circuit breaker and fuses. Ensure you've selected a heat setting other than Air fluff and that the temperature selection isn't set to 'No heat.' For gas dryers, verify the gas supply is on. Also, clean the lint filter and exhaust duct. Finally, the dryer may have entered the cool-down process of the cycle.
What to do if Midea MLE27N4AWWC doesn’t start?
If your Midea Dryer isn't starting, ensure the door is fully latched. Check that the power cord is properly plugged into a working electrical outlet. Inspect your home's circuit breaker and fuses. If the door was opened during a cycle, press the Start/Pause button again.
General| Brand | Midea |
|---|---|
| Model | MLE27N4AWWC |
| Appliance Category | Dryer |
| Type | Electric |
| Color | White |
| Number of Cycles | 12 |
| Voltage | 240V |
| Amperage | 30A |
| Dryer Vent Type | Vented |
| Number of Temperature Settings | 4 |
| Wrinkle Prevent Option | Yes |
| End of Cycle Signal | Yes |
| Door Reversal | Yes |
| Weight | 120 lbs |
| Energy Efficiency | ENERGY STAR Certified |
| Ventless | No |
| Width | 27 inches |
| Control Type | Electronic |
| Height | 38 inches |
Essential instructions for installers to ensure proper dryer setup and safety.
Fundamental checks and necessities before commencing dryer installation.
Specifications for selecting an appropriate and safe placement for the dryer.
Details on the optional condensing drain hose connection and usage.
Steps for safely unpacking the dryer and inspecting for damage.
Visual guide identifying all major parts of the Midea dryer.
Requirements for power supply, wiring, and outlet compatibility for the dryer.
List of all tools required for the successful installation of the dryer.
Step-by-step instructions for safely wiring the dryer.
Detailed steps for connecting the dryer using a 4-wire electrical setup.
Specific guidance and safety notes for the 4-wire dryer connection.
Explanation and instructions for properly grounding the dryer for electrical safety.
Explanation of the functions and buttons on the dryer's control panel.
Instructions for loading the dryer and starting a drying cycle.
Procedure for emptying the dryer's water tank after use.
Instructions for cleaning the lint filter to maintain efficiency and prevent fires.
Steps for cleaning the dryer's base filter, ensuring proper airflow.
Instructions for cleaning the heat exchanger to maintain dryer performance.
How to clean the dryer's control panel safely.
Guidance on cleaning the dryer's internal drum.
Instructions for cleaning the outer surfaces of the dryer.
Guide to diagnosing and resolving typical dryer issues.
List of error codes, their potential causes, and suggested solutions.
Steps to follow and information required when requesting warranty service.
Explanations of situations and conditions not covered by the dryer warranty.
Benefits and process for registering the dryer for product protection.
