5. Unloading your laundry.
CONTROL LOCK
ECO DRY
• This function will reduce the energy consumption
by reducing drying temp but increasing operation
time.
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use
Appendix
Dryer Care
Troubleshooting
38
• After the cycle is done, the “Done” indicator
graphic will flash, and the dryer will beep 6
times.
• You can turn on your dryer, set this function,
then turn it off.
When you do so, even if the unit is powered on, •
you still cannot start it before the Control Lock
function is deactivated.
This function will not be cancelled if your unit •
loses power, such as when you unplug it or the
power turns off.
Your dryer has a control lock feature to prevent
children from playing with your dryer. When you
turn on the control lock, the only button that
works is Power.
Press and hold both the “TIME ADJUST +” and
“TIME ADJUST -” buttons for three seconds.
The control lock ico turns on.
To turn control lock, press and hold both the off the
“TIME ADJUST +” and “TIME ADJUST -” buttons for
three seconds.
To Next Page
Loading...
Need help?
General
