How to activate test mode on Midea MDH210-V042/B01EHS-US?
To activate test mode on your Midea Dryer, ensure the door is closed. Then, press the [Time Adjust+] and [Wrinkle Care] buttons simultaneously within 3 seconds after pressing the [Power] button. The screen will then display 'St', indicating that the unit has entered test mode.
General| Brand | Midea |
|---|---|
| Model | MDH210-V042/B01EHS-US |
| Type | Heat Pump Dryer |
| Color | White |
| Fuel Type | Electric |
| Ventless | Yes |
| Voltage | 120V |
| Noise Level | 65 dB |
| Drying Technology | Heat Pump |
| Control Type | Electronic |
General safety guidelines to minimize risks during operation and maintenance.
Critical warnings about potential hazards like fire, explosion, and injury.
Important advisories regarding usage, installation, and child safety.
Explanation of the dryer's control panel buttons and their functions.
Details on available drying cycles, fabric types, and option combinations.
Specifies the physical dimensions and clearance requirements for installation.
Guidelines for proper exhaust duct installation, materials, and length.
Critical rules for safe and effective dryer exhaust to prevent fire hazards.
Specifications and safety standards for connecting natural or LP gas.
Details on power supply, voltage, amperage, and wiring for safe operation.
Instructions for proper grounding to prevent electrical shock hazards.
Lists the necessary tools for correctly installing the dryer.
Step-by-step guide for physically installing the dryer and its connections.
Instructions on how to change the door swing direction for installation flexibility.
Procedure to enter diagnostic test mode via control panel buttons.
Overview of different diagnostic tests available on the dryer.
List of error codes, their causes, and recommended repair actions.
Visual representation of electrical connections and terminal layouts.
Flowcharts and guides for diagnosing and resolving common dryer issues.
To Next Page