Service manual for Dryer Machine Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－ 6 －
2. How to use
2.1 Controls and function
1. Power button
Press to turn your dryer on or off. If your dryer is on for more than 10 minutes without any buttons
being pressed, it automatically turns off.
2. Start/pause button
Press to start or pause the program. You can’t change any setting except add a garment.
3. Cycle selector
Select your desired cycle for the type of load. The cycle you select determines the heat control for
the cycle. The Normal, Delicates, Bulky, Towels, Heavy Duty and Sanitize cycles are Sensor Dry
cycles. The Air Fluff, Time Dry, Quick Dry and Towel Warmer cycles are Manual Dry cycles.
4. SIGNAL
Press once to stop the buzzer sound. Press again to activate the sound. Your selection will be kept
until next pressing.
5. WRINKLE CARE
Press once to add the wrinkle care step into the operating program. Press again to cancel
selection. wrinkle care provides approximately 90 minutes of intermittent tumbling in unheated air
at the end of the cycle to reduce wrinkling. The load is already dry, and can be removed at any
time during the wrinkle care cycle.
6. DAMP DRY SIGNAL
This function is useful when you want to take some garments out for ironing. The unit will beep 6
times when the moisture in the clothes is good for ironing. At this time, you can take those
garments out and continue drying the other by pressing the "START/PAUSE" button once.
To Next Page
Loading...
Need help?
General