34
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use
Appendix
Dryer Care
Troubleshooting
DRYING A LOAD OF LAUNDRY
1. Power on your dryer.
•
Press this Power button to power your dryer on.
2. Load your dryer.
•
Place only one wash load in your dryer at a time.
•
Mixed loads of heavy and light weight fabrics will dry
differently, which may result in lightweight fabrics being
dry while heavy fabrics remain damp at the end of a
drying cycle.
•
Add one or more similar items to your dryer when
only one or two articles of clothing need drying. This
improves the tumbling action and drying efficiency.
•
Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of some
fabrics.
3. Select the appropriate cycle and options for the load.
•
Select the appropriate cycle by Cycle
Selector according to the cycle chart on
page 35.
•
Select the appropriate optional function
by buttons according to the chart on
page 35.
•
Your favorite drying Cycle
Once you have set the cycle selector and option
function, you can push and hold the “My Cycle” button
for 3 seconds to memory this setting as your favorite
cycle before start the unit. The light beside the knob
will flash to confirm the memory with beeps.
•
You can finish this Step by just push the “My Cycle”
button once to use your favorite cycle or make some
additional change.
4. Start your dryer.
Pressing Start/Pause button will start the selected cycle.
To PAUSE cycle press Start/Pause button then open the
door. To resume operation after closing the door always
press Start/Pause. Opening the door during the operation
will instantly stop operation and will require to press Start/
Pause button to resume operation.
To Next Page
Loading...
Need help?
General