EasyManua.ls Logo

Midea MLH52S7AGS - Page 25

Midea MLH52S7AGS
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Washer
Safety
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting
CLEANING THE PUMP FILTER
Due to the nature of the front-load washer, it is sometimes possible for
small articles to pass to the pump. The washer has a filter to capture lost
items so they are not dumped to the drain. To retrieve lost items, clean out
the pump filter.
Pump filter
1. Using a coin or flat screwdriver in the notch on the door, open the
access door.
2. Place a shallow pan or dish under the pump access door and towels on
the floor in front of the washer to protect the floor. It is normal to catch
about a cup of water when the filter is removed.
3. Pull down the pour spout.
Pour
spout

Table of Contents

Related product manuals