Midea MMO17S3AST

Glass Tray 1
Turntable Ring 1
For some models
Convection wire rack 1
For some models
Shelf 1
For some models
PureAir Microwave Filter 1
Tools You Will Need
# 1 Phillips screwdriver
Pencil
Ruler or tape measure
and straight edge
Carpenter square
(optional)
Tin snips (for cutting
damper, if required)
Hammer (optional)
Stud finder or
Gloves
Level
Saw (saber, hole or keyhole)
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape
Electric drill with
3
⁄16“,
1
⁄
2
“ and
5
⁄
8
“
drill bits
Scissors
(to cut template,
if necessary)
Safety goggles
EN-16