Midea MOR17BSA-SS - Page 38

Back of
Microwave
Back of
Microwave
Before Rotation After Rotation
4. Rotate blower unit counterclockwise 180°.
Before Rotation After Rotation
Back of
Microwave
Back of
Microwave
5. Gently remove the wires from the grooves. Reroute the wires through grooves on
other side of the blower unit.
Before Rerouting After Rerouting
Wires Routed
Through Right Side
Wires Routed
Through Left Side
6. Rotate the blower unit 90° so that fan blade openings are facing out the back of the
mi-crowave.
Before Rolling After Rolling
Back of
Microwave
Back of
Microwave
3. Roll the blower unit 90°
EN-37