Midea MP12DWWBA2RCM User Manual

Remote Controller Illustation
Function Buttons
Before using your new air conditioner, make sure to familiarize yourself with the remote
controller. The following is a brief introduction to the remote controller. For instructions on how to
operate your air conditioner, refer to the "How to Use the Basic Functions" section of this manual.
SHORT CUT
Sets and activates your
favourite presettings.
ON/OFF
Turns the unit on or off.
MODE
Scrolls through operation
modes as follows:
AUTO
COOL DRY FAN
FAN SPEED
Selects fan speeds in
the following order:
AUTO
LOW
MED HIGH
SLEEP
Saves energy during
sleeping hours.
TEMP
Increases the temperature in
O O
1 C (1 F) increments.
1 C (1 F) increments.
Max. temperature is
O O
30 C (86 F).
O O
17 C (62 F).
TEMP
Decreases temperature in
O O
Min. temperature is
TIMER ON
Sets the timer to turn the unit
on refer to "How to Use
Basic Functions" for
instructions).
TIMER OFF
Sets the timer to turn the unit
off refer to "How to Use
Basic Functions" for
instructions).
SWING
Starts and stops the louver
movement. (only for 12K)
LED
Turns on off indoor unit s LED
,
NOTE: If you are sensitive
to light when you go to
sleep, you can press the
LED button to turn off
the LED display on the
unit. Press the button
again to turn it back on.
display.
NOTE: Press and hold the
and buttons together for
3 seconds to switch the
temperature display
O O
between the C & F scale.
FOLLOW ME
Temperature
sensing and
room temperature
display button.
(only for 12K)
22

Midea MP12DWWBA2RCM Specifications

General

Brand	Midea
Model	MP12DWWBA2RCM
Category	Air Conditioner
Language	English