Remote Controller Illustration
1. Press the MODE button to select the DRY
mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFF button to start the unit.
NOTE: FANSPEED cannot be changed in
DRYmode.
1. Press the MODE button to select the FAN
mode.
2. Press theFAN button to select the fan
speed:AUTO,LOW, MED, or HIGH.
3. Press the ON/OFF button to start the
unit.
NOTE:The temperature cannot be set in
FAN mode. As a result, your remote
controller’ sLCD screen will not display
the temperature.
How to Use the Basic Functions
FAN Operation
DRY Operation (dehumidifying)
1
3
2
1
2
3
26
To Next Page
Loading...
Need help?
General
