Installation detail
12
6.5.4 Close the sliding sash securely against the window.
6.5.5 Cut the foam seal to an appropriate length and sealing the open gap between the top
window sash and outer window sash. Show as below picture.
6.6 Permanent installation
6.6.1 Attach one end of the duct to the exhaust air outlet of the mobile air conditioner.
According to the arrow direction, push it downwards, be sure to fix thoroughly.
6.6.2 Install the adaptor A onto the wall by using 4 expansion plugs and screws, be sure to fix
thoroughly.
6.6.3 Attach the other end of the duct to adaptor A.
To Next Page