Midea MPM1-10CEN1-BB6 - Page 6

Outer dimension
4
a. Number of rows
2 2
b. Tube pitch(a)x row pitch(b) mm
21X13.37 21X13.37
c. Fin spacing mm
1.5 1.5
d. Fin type (code)
Hydrophilic aluminum Hydrophilic aluminum
etude outside diamante type mm
Ф7×0.25×0.18,
inner groove tube
Ф7×0.25×0.18,
inner groove tube
facial length x height x width mm
372x294x26.74 372x294x26.74
g. Number of circuits
2 2
Cond.
a. Number of rows
2 2
b. Tube pitch(a)x row pitch(b) mm
21X13.37 21X13.37
c. Fin spacing mm
1.3 1.3
d. Fin type (code)
Hydrophilic aluminum Hydrophilic aluminum
e. Tube outside dia. and type mm
Ф7×0.25×0.18,
inner groove tube
Ф7×0.25×0.18,
inner groove tube
f. Coil length x height x width mm
758x294x13.37+716x294x13.37 758x294x13.37+716x294x13.37
g. Number of circuits
2 2
1 Cooling capacity estimated using room balance at 27°C db and 19°C wb
2 Cooling EER estimated using room balance at 35°C db and 24°C wb