21
NOTE: To ensure proper function, DO NOT overextend or bend the hose. Make sure that there is no
obstacle around the air outlet of the exhaust hose (in the range of 500mm) in order to the exhaust
system works properly. All the illustrations in this manual are for explanation purpose only. Your air
conditioner may be slightly different. The actual shape shall prevail.
1. During dehumidifying mode, remove the drain plug from the back of the unit, install the drain
connector (5/8" universal female mender) with 3/4" hose (locally purchased). For the models without
drain connector, just attach the drain hose to the hole. Place the open end of the hose directly over
the drain area in your basement floor.
NOTE: Make sure the hose is secure so there are no leaks. Direct the hose toward the drain, making sure
that there are no kinks that will stop the warter flowing. Place the end of the hose into the drain and
make sure the end of the hose is down to let the water flow smoothly. When the continuous drain
hose is not used, ensure that the drain plug and knob are installed firmly to prevent leakage.
8.2 Care and maintenance
Important
1) Be sure to unplug the unit before cleaning or servicing.
2) Do not use gasoline, thinner or other chemicals to clean the unit.
Water drainage installation
To Next Page
Loading...
