R410A Rooftop Package Unit 60Hz MCAC-RTSM-2014-03
4. Features
1. The adoption of anticorrosive-box
The reinforced anticorrosion by using galvanization armor plate and coated with man-composed paint.
The appearance is stylish and be easy for maintenance.
(Has been passed 1000 hours salt spray test)
2. The adoption of credible protection system
2.1 The protection of compressor
High-pressure protection, low-pressure protection, compressor current protection and so on can ensure
compressor operating normally.
Adopts independent system, except for protections of sequence and wired control output, any protection
relates to its corresponding compressor. Once a compressor protection energized, the corresponding
compressor will stop, as others are still working.
2.2 Fan motor
The fan motors for evaporator have over-heat protection and over-current protection function. The fan
motors for condenser have the temperature controller protection function.
3. Energy saving design
3.1 High efficiency compressor
Using professional compressor, heat exchanger and optimum connection pipe, the compressor can
startup under low power input.
3.2 Condenser
By using the high-efficient thin wing as the heat exchanger, the waste of energy is greatly decreased.
3.3 Evaporator
By using high-efficient thin wing, the condenser has high-efficient heat exchanger, the energy waste
decreases greatly.
3.4 The heat insulation of indoor unit
The heat insulation of indoor unit can availably decrease heat loss.
4. Optional collocation
4.1 Wide operation temperature
The air-conditioner designed for high temperature can run despite the ambient temperature reaches up
to 46℃（115℉）.
4.2 Strong air flow
Large air volume from the air inlet is forced ventilating by the condenser fan.
4.3 Minimum installation arrangement
The installation is fast and low cost with the easy installation and ready operation.
To Next Page
Loading...
Need help?
General
