22
EN
Cleaning of glass shelf
Slot
Upper end of
fixed leg
Lower end of
fixed leg
Please dismantle the cantilever shelf according to the arrows shown as above:
1. Please hold the front edge of shelf, and tilt the shelf inwards until the lower
end of fixed leg is separated from the slot of supporting iron;
2. Uplift the whole shelf until it can not rise anymore;
3. Take out the shelf horizontally.
During installation, put the upper end of the fixed leg into one of the upper slots
on the supporting iron first and then put the lower end of the fixed leg into the
third slot on the lower part of the supporting iron.
To Next Page
Loading...
Need help?
General
