07
EN
PRODUCT INSTALLATION
Install Instruction
Finding a suitable location
ȼ
ȼ
ȼ Keep away from heat and avoid direct sunlight. Do not place the refrigerator in
moist or watery places to prevent rust or reduction of insulating eect.
This refrigerator is designed to be free standing only and should not be
installed in a recessed or built-in space.
The refrigerator should be placed in a well-ventilated indoor place and the
ground should be flat and sturdy.
Dimensions and Clearances
ȼ Too small of a distance from adjacent items may result in the degradation
of freezing capability and increased electricity costs. Allow over 4" of
clearance from each adjacent wall when installing the appliance.
Required space for
air circulation
Top View
>4"
>4"
>4"
>4"
>4"
>4"
Providing a proper power supply
ȼ Check your local power source. This refrigerator requires a AC115 V, 60 Hz
power supply.
ȼ Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric shock
hazard from this refrigerator.
CAUTION
The refrigerator should always be plugged into its own individual electrical
outlet which has a voltage rating that matches the rating plate.
Never unplug your refrigerator by pulling on the power cord. Always grip the
plug firmlyand pull straight out from the outlet.
WARNING: When positioning the appliance, ensure the supply cord is not
trapped orˏdamaged.
Start to use
ȼ The refrigerator should sit in an upright position for 2 hours before connecting
power when it is initially started.
ȼ The refrigerator should run 2 to 3 hours before loading fresh or frozen foods.
The refrigerator should run for more than 4 hours in advance when the
ambient temperature is high.
To Next Page
Loading...
Need help?
General
