EasyManua.ls Logo

Midea MS9V-18HRDN1-QC2(B) 9V SERIES - Operation Modes and Functions

Midea MS9V-18HRDN1-QC2(B) 9V SERIES
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
----Preheating release condition:
If T45
or user turns on the ma
---- Crankcase Heater
It starts when T4<5 and stops when T4>15℃
8.4 Operation Modes and Functions
8.4.1 Fan only mode.
(1) Outdoor fan and compressor stop.
(2) Temperature setting function is disabled, and no setting temperature is display.
(3) Indoor fan can be set to high/med/low/auto.
(4) The louver operates same as in cooling mode.
(5) The action of auto fan in fan-only mode is the same as auto fan in cooling mode with 24 s e ttin g
temperature.
8.4.2 Cooling Mode
8.4.2.1 Compressor running rules:
The operation frequency of compressor after starting submits to following rule.

Related product manuals