Need help?Do you have a question about the Midea MSG-16HRN2 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Noise Level (Indoor Unit) | 42 dB(A) |
| Type | Split Air Conditioner |
| Cooling Capacity | 16000 BTU |
| Energy Efficiency Ratio (EER) | 3.2 |
| Operating Temperature (Cooling) | 18°C to 43°C |
Safety guidelines to prevent injury and damage during operation.
Critical warnings for installation and operation to avoid hazards.
Dimensions and specifications for the indoor unit.
Dimensions and specifications for the outdoor unit.
Operating limits for cooling mode based on temperatures.
Operating limits for heating mode based on temperatures.
Electrical schematic of the air conditioner system.
Wiring connections for various models.
Torque specifications for installation fittings.
Cable connection specifications and grades.
Guidelines for refrigerant pipe length and elevation.
Procedure for removing air from the system.
Procedure for pumping down refrigerant during re-installation.
Procedure for re-purging air after re-installation.
Balancing refrigerant levels using valves.
Procedure for evacuating the refrigerant system.
Procedure for charging the system with refrigerant.
Cooling and heating capacity for model MSG-07CRN2.
Cooling and heating capacity for model MSG-07HRN2.
Cooling and heating capacity for model MSG-09CRN2.
Cooling and heating capacity for model MSG-09HRN2.
Cooling and heating capacity for model MSG-12CRN2.
Cooling and heating capacity for model MSG-12HRN2.
Cooling and heating capacity for model MSG-16CRN2.
Cooling and heating capacity for model MSG-16HRN2.
Cooling and heating capacity for model MSG-18CRN2.
Cooling and heating capacity for model MSG-18HRN2.
Cooling and heating capacity for model MSG-21CRN2.
Cooling and heating capacity for model MSG-21HRN2.
Specifies operating environment for electronic controls.
Explains symbols used in electronic functions.
Details various functions of the electronic control system.
Details various protection mechanisms for the unit.
Description of the fan-only operation mode.
Explanation of the cooling operation mode.
Explanation of the dehumidifying operation mode.
Explanation of the heating operation mode.
Conditions and actions for defrosting in heating mode.
Explains indicators on the display board.
Lists failure phenomena and corresponding indicator statuses.
Flowchart for diagnosing operational issues.
Procedure for diagnosing frequent resetting issues.
Troubleshooting steps for specific lamp indicator status.
Troubleshooting steps for specific lamp indicator status.
Troubleshooting steps for specific lamp indicator status.
Troubleshooting for specific lamp indicator status.
Troubleshooting for specific lamp indicator status.
To Next Page
