Why does my Midea MSG-12CR keep resetting?
The resetting phenomenon often occurs during operation because the instantaneous voltage of the main chip is less than 4.5V. To resolve this, check the indoor PCB and fan motor.
What to do if my Midea MSG-12CR Air Conditioner shows an EEROM error and the indoor PCB is defective?
If your Midea Air Conditioner displays an EEROM error and the indoor PCB is defective, replace the indoor PCB.
General| Brand | Midea |
|---|---|
| Model | MSG-12CR |
| Category | Air Conditioner |
| Language | English |
Instructions to prevent injury, damage, and ensure safe operation of the unit.
Covers installation and general warnings for safe operation.
Provides cautions and guidelines for operating the unit safely.
Details torque settings for installation fittings and power cord gauge requirements.
Procedure for removing air from the refrigeration system.
Steps for removing refrigerant during re-installation.
Procedure for re-purging the system after re-installation.
Process for creating a vacuum in the refrigeration system.
Steps for charging the system with the correct amount of refrigerant.
Explains various protection mechanisms for the air conditioner.
Details Fan-only, Cooling, and Dehumidifying modes.
Lists failure symptoms and corresponding indicator lights.
To Next Page
