Why does my Midea Room air conditioner keep resetting?
If your Midea Room air conditioner frequently resets during operation, it could be due to a defective indoor PCB. To resolve this, replace the indoor PCB and then check if the failure persists. Another potential cause is problems with the power supply circuit. In this case, replace the indoor fan motor and check if the issue is resolved.
What does it mean when the Operation lamp is on and the Timer lamp flashes on my Midea Room air conditioner?
If the Operation lamp is on and the Timer lamp flashes on your Midea Room air conditioner, it indicates an EEROM error or a defective indoor PCB.
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Type | Split |
| Cooling Capacity | 24000 BTU |
| Power Consumption | 2100W (Heating) |
| Operating Temperature (Cooling) | 18°C to 43°C |
Essential safety instructions for preventing injury and property damage during operation and installation.
Critical warnings regarding installation, operation, maintenance, and general safety to prevent hazards.
Detailed technical specifications for various Midea air conditioner models, including power, capacity, and components.
Covers torque specs, cable connections, pipe length, air purging, pumping down, re-purging, refrigerant balancing, evacuation, and gas charging.
Guides on identifying failure phenomena and corresponding lamp indications for cooling and heat pump modes.
Provides flowcharts and procedures for diagnosing common operational issues and lamp status.
To Next Page
