Need help?Do you have a question about the Midea MSG-21HRN2 and is the answer not in the manual?
General| Cooling Capacity | 21000 BTU/h |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Power Consumption (Cooling) | 2000 W |
| Air Flow (High) | 850 m³/h |
| Type | Split System |
| Heating Capacity | 22000 BTU/h |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Noise Level (Indoor) | 45 dB |
Instructions to prevent injury to users and property damage during operation and installation.
Critical warnings regarding installation, handling, and operational safety.
Provides width, height, and depth measurements for the indoor unit models.
Details the width, height, depth, and other dimensions for outdoor units.
Defines the operating temperature ranges for efficient cooling.
Defines the operating temperature ranges for efficient heating.
Illustrates the electrical circuit layout of the air conditioner.
Shows the wiring connections for cooling operational modes.
Illustrates the wiring connections specific to heating operational modes.
Specifies torque values for fasteners during installation.
Procedure for removing air from the refrigerant piping system.
Process for safely recovering refrigerant during unit re-installation.
Steps to create a vacuum in the refrigerant system for moisture removal.
Instructions for adding the correct amount of refrigerant to the system.
Cooling and heating capacity ratings for the MSG-07CRN2 model.
Cooling and heating capacity ratings for the MSG-09CRN2 model.
Cooling and heating capacity ratings for the MSG-12CRN2 model.
Specifies the voltage, frequency, and temperature for electronic controls.
Details safety features like compressor protection and sensor faults.
Explains functions specific to heating operation, including fan and protection.
Describes the automatic adjustments for sleep mode in cooling, heating, and auto.
Explanation of status lights on the display board.
Flowchart to diagnose operational issues starting from power-on.
Guides for diagnosing issues based on operation and timer lamp patterns.
To Next Page
