EasyManua.ls Logo

Midea MSG-24HRN2 User Manual

Midea MSG-24HRN2
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MSG-24CRN2; MSG-24HRN2
MSG-30CRN2; MSG-30HRN2

Questions and Answers:

Midea MSG-24HRN2 Specifications

General IconGeneral
Cooling Capacity24000 BTU/h
Power Supply220-240V, 50Hz
RefrigerantR410A
TypeSplit Air Conditioner
Operating Temperature (Cooling)17-43 °C

Summary

Safety and Precautions

Safety Precaution

Instructions to prevent injury, damage, and ensure safe operation.

Warning

Critical warnings regarding installation and usage to avoid hazards.

Unit Functions

Indoor Unit Functions Overview

Overview of functions related to the indoor unit operation.

Outdoor Unit Features Overview

Outlines features of the outdoor unit, such as power relay and anti-rust cabinet.

Unit Dimensions

Indoor and Outdoor Unit Dimensions

Physical dimensions for both indoor and outdoor units.

Technical Specifications

24K Model Specifications

Technical specifications for MSG-24CRN2 and MSG-24HRN2 models.

30K Model Specifications

Technical specifications for MSG-30CR and MSG-30HR models.

3-Phase 30K Model Specifications

Technical specifications for 3-phase MSG-30CR and MSG-30HR models.

Refrigerant System and Operation

Refrigerant Cycle Diagrams

Illustrates refrigerant flow in cooling and heat pump modes.

Operation Limits

Defines the temperature and humidity ranges for cooling and heating operations.

Electrical Diagrams and Installation

Schematic and Wiring Diagrams

Electrical schematics and wiring layouts for different operating modes.

Installation Procedures

Covers torque, cable connection, piping, purging, and gas charging steps.

Performance and Electronics

Capacity Tables

Data on total and sensitive capacity for different models and conditions.

Electronic Functions and Controls

Explains control environment, symbols, functions, and modes.

Sleep and Auto Restart Functions

Details on sleep mode operation and auto restart after power failure.

Model Parameters and Troubleshooting

Model and Parameter Lists

Lists key operational parameters for 1-phase and 3-phase models.

Display Board and Indicators

Interpretation of unit indicators and display board elements.

Troubleshooting Guide

Guides on diagnosing failures using lamp status and diagnostic charts.

Temperature Sensor Characteristics

Provides resistance values for temperature sensors at various temperatures.

Related product manuals