Why does my Midea Room air conditioner keep resetting?
If your Midea Room air conditioner frequently resets during operation, it could be due to a defective indoor PCB. To resolve this, replace the indoor PCB and then check if the failure persists. Another potential cause is problems with the power supply circuit. In this case, replace the indoor fan motor and check if the issue is resolved.
What does it mean when the Operation lamp is on and the Timer lamp flashes on my Midea Room air conditioner?
If the Operation lamp is on and the Timer lamp flashes on your Midea Room air conditioner, it indicates an EEROM error or a defective indoor PCB.
Instructions to prevent injury and property damage during operation and handling.
Critical safety instructions and warnings related to product installation.
Details on functions and modes specific to the indoor unit.
Defines acceptable outdoor and indoor temperature ranges for cooling.
Defines acceptable outdoor and indoor temperature ranges for heating.
Electrical circuit diagram detailing component connections.
Wiring connections for cooling mode on MSG-24CR and MSG-30CR models.
Wiring connections for heating mode on MSG-24HR and MSG-30HR models.
Wiring diagram for 3-phase cooling operation of MSG-30CR.
Wiring diagram for 3-phase heating operation of MSG-30HR.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Type | Split System |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Cooling Capacity | 36000 BTU/h |
| Heating Capacity | 36000 BTU/h |
To Next Page
