Need help?Do you have a question about the Midea MSH-18HRIN1 and is the answer not in the manual?
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Weight (Outdoor Unit) | 35 kg |
| Capacity | 1.5 Ton |
| Type | Split |
Essential safety instructions for users and property to prevent injury and damage during operation.
Critical warnings regarding installation, operation, and electrical safety to prevent hazards.
Details ON/OFF, remote control, auto, manual, timer, sleep, auto-restart, and turbo functions.
Covers room temperature sensing, control, anti-freezing, and compensation features.
Explains fan speed, air vane direction, and independent dehumidification modes.
Covers anti-cold, auto defrost, plasma, voltage, efficiency, and wiring.
Highlights power relay control, low noise system, hydrophilic fins, and protection.
Details anti-rust cabinet, valve protection, and 4-way valve operation.
Physical dimensions (W, H, D) for the Alfa series indoor unit.
Physical dimensions (W, H, D) for the Alfa series outdoor unit.
Physical dimensions (W, H, D) for the Corona series indoor unit.
Physical dimensions (W, H, D, L1, L2, L3) for the Corona series outdoor unit.
Physical dimensions (W, H, D) for the Inverter Eco indoor unit.
Physical dimensions (W, H, D) for the Inverter Eco outdoor unit.
Physical dimensions (W, H, D) for the Inverter Star indoor unit.
Physical dimensions (W, H, D) for the Inverter Star outdoor unit.
Detailed technical specifications for Alfa and Corona series air conditioner models.
Technical specifications for the Inverter Eco series air conditioner models.
Technical specifications for the Inverter Star series air conditioner models.
Defines the valid indoor and outdoor temperature ranges for cooling mode.
Defines the valid indoor and outdoor temperature ranges for heating mode.
Circuit diagrams for indoor and outdoor PCBs and display boards.
Illustrations showing electrical connections between indoor and outdoor units.
Recommended torque values for various pipe connections during installation.
Guidelines for selecting the correct power cord gauge based on unit capacity.
Maximum allowed pipe lengths and elevation differences for reliable operation.
Step-by-step guide for removing air from the refrigerant piping system.
Procedure to safely recover refrigerant when moving or reinstalling the unit.
Steps for purging air from the system after a re-installation process.
Procedure to balance refrigerant levels using the 2-way and 3-way valves.
Method for creating a vacuum in the refrigerant circuit to remove moisture and air.
Instructions for charging the system with the correct amount of refrigerant.
Cooling and heating capacity data for the MSH-18HRIN1 model.
Cooling and heating capacity data for the MSC-18HRIN1 model.
Cooling and heating capacity data for the MSG-09HRI model.
Cooling and heating capacity data for the MSG-12HRI model.
Cooling and heating capacity data for the MSG-21HRI model.
Cooling and heating capacity data for the MSG-24HRI model.
Explains display indicators like AUTO, TIMER, and protection features such as voltage and temperature limits.
Covers fan-only, cooling, dehumidifying, and heating modes with their specific operations.
Details defrosting operation, outdoor low temperature protection, and their conditions.
Includes auto mode, manual switch, timers, sleep, auto-restart, turbo, and plasma features.
Lists error codes for indoor units and explains their meanings.
Provides a flowchart for diagnosis and addresses resetting phenomena during operation.
Covers various lamp flashing combinations and operational errors for troubleshooting.
To Next Page
