23
9. Electronic function
9.1 Abbreviation
T1: Indoor room temperature
T2: Coil temperature of evaporator
T3: Coil temperature of condenser
T4: Outdoor ambient temperature
T5: Compressor discharge temperature
Ts
c: Adjusted setting temperature
9.2 Display function
9.2.1 Icon explanation on indoor display board.
Digital display:
Displays temperature, operation feature and
Error codes.
In Fan mode, the unit will display the room
temperature.
In other modes, the unit will display your
temperature setting.
Dispalys ‘
’ for three seconds when Timer
ON, Fresh, Swing, Turbo or Silence feature is
activated.
Dispalys ‘
’ for three seconds when Timer
OFF is set. Fresh, Swing, Turbo or Silence
feature is cancelled.
Dispalys ‘
’ under deforsting operation.
Dispalys ‘
’ when anti-cold air feature is
activated under heating mode.
Dispalys ‘ ’ during self clean operation (if
aplicable).
Dispalys ‘
’ when freeze protection is
turned on(some units).
Dispalys ‘
’when fresh feature is turned on
(some units)
Dispalys ‘
’when ECO feature is
activated(some units)
WIFI control display(optional)
Displays when wireless control feature is
activated(some units)
‘
’Indicates the current operation power
NOTE:
A guide on using the infrared remote is not
included in this literature package..
To Next Page
Loading...
