Need help?Do you have a question about the Midea MSR1-07HRN1-QB6A and is the answer not in the manual?
General| Brand | Midea |
|---|---|
| Model | MSR1-07HRN1-QB6A |
| Category | Air Conditioner |
| Language | English |
General safety instructions to prevent injury and property damage.
Critical safety warnings and cautions for installation, operation, and maintenance.
Lists indoor and outdoor unit model names categorized by capacity and series.
Provides dimensions (W, H, D) for various indoor unit models.
Provides dimensions (W, D, H, W1, A, B) for various outdoor unit models.
Diagram illustrating the refrigerant cycle for cooling-only air conditioners.
Diagram illustrating the refrigerant cycle for heat pump models.
Wiring diagrams for various indoor unit models.
Wiring diagrams for specific outdoor unit models.
Specifies torque values for various pipe diameters during installation.
Guidelines for selecting power cord cross-sectional area based on appliance current.
Details on pipe length, refrigerant amount, and elevation limits for models.
Procedures for initial system setup, including purging and refrigerant charging.
Procedure for adding refrigerant to a system that has been in use for several years.
Steps for re-installing after indoor unit repair, including refrigerant collection.
Steps for re-installing after outdoor unit repair, including evacuation and charging.
Defines operating temperature ranges for cooling, heating, and drying modes.
Defines abbreviations for various temperature sensors used in the system.
Explains icons displayed on the indoor unit's display board.
Explains the time delay feature for compressor restarts.
Describes failure and LED indication for fan speed control problems.
Details the different zones (A, B, C) of current protection for the unit.
Explains protection for zero crossing signal errors in specific models.
Describes protection for communication failures between indoor and outdoor units.
Explains fan operation in different modes, including auto fan.
Explains compressor, outdoor fan, and indoor fan running rules in cooling mode.
Explains compressor, outdoor fan, and indoor fan running rules in heating mode.
How the AC selects cooling, heating, or fan-only mode based on temperature difference.
Operation rules for the drying mode.
How to activate and use forced cooling and auto modes.
Explanation of timer settings for on, off, and combined functions.
Details of sleep mode operation and its interaction with timers.
How the unit resumes operation after a power failure.
Table showing error codes displayed by the indoor unit and their meanings.
Troubleshooting steps for indoor fan speed control issues.
Troubleshooting for temperature sensor open circuit or short circuit errors.
Troubleshooting steps for over current protection errors.
Troubleshooting steps for EEPROM parameter errors.
Troubleshooting steps for zero crossing detection errors.
Troubleshooting steps for indoor/outdoor unit communication errors.
To Next Page