09
EN
Control Panel Operations
• When the unit is turned on and the constant humidity function is off,
press the button to turn on the ECO humidity function , Press it again to
turn off this function.
• Repeatedly tap to set a shut-off timer of 0, 1, 2, 4, or 8 hours.
• When the unit is turned on, press this button to turn on the warm mist
function, press it again to turn off the function.
• Repeatedly tap to cycle between light colors of red, green, blue,and
none.
Function description
• Tap to power on the humidifier and tap again to power off the
humidifier.
• Repeatedly tap to cycle between mist level 1, 2, and 3
DIMMER
NOTE
After power-on, when the product is in standby state, the display icon light “ + + + ”
will be on at the same time. If there is no operation within 60 seconds, the display will
enter the off-screen state.
After power on, you can turn on/off the screen-off function by pressing and holding the
key combination “ + ” for 3 seconds.
"--" indicates water is flowing from the tank to the base.
"P1" indicates shortage of the water,water needs to be added to the tank.
To Next Page
Loading...
