10
EN
Water Filling (Two Methods)
Methods A
NOTE
• Please be sure to unplug the power cord before filling water.
• Never fill water tank exceed the MAX indication line(1.6Gal/6L ).
• Do not add water through the mist outlet.
• Never attempt to lift the water tank by the tank cover;
• Please do not add additives like essential oils, perfume, drugs, etc. to the water.
But you can add aroma liquid in the built in essential oil tray.
• Please use purified or distilledwater below 40°C.
1
Take out the water tank.
2
Remove the lid of the tank.
3
Pour cold/warm (no higher than
40°C
) distilled or filtered water into the water tank.
Purified
water
NOTE
• Make sure the tank lid is covered on the water tank properly after the water is filled in
the tank.
• When installing back to the lower shell, it is necessary to ensure that the two buckle
grooves on the water tank and the surface plate are in place.
To Next Page
Loading...
