Service manual
- 27 -
after 2 hours, and during the next time the set temp do not change. The total time is 7 hours, after 7
hours the unit stops.
7.13 Auto restart function
In case of a sudden power failure, this function automatically sets the unit to previous settings before
the power failure when power returns.
7.14 Ionizer (air clean) function
7.14.1 Ionizer (air clean) function is effected when the unit is working and controlled by the remote
controller.
7.14.2 This function is active when the unit received the signal from the remote controller first time and
inactive when received the signal again. Repeat this circle when received signal again.
7.14.3 This function is working only when the indoor fan is working.
7.14.3 This function will not stop when the working mode changed, and be inactive when the unit shut
down.
To Next Page
Loading...
Need help?
General
