Midea MSV1-12HRDN1-MQ0W - Page 106

102
3) Disconnect the
connector for fan motor
from the electronic control
board.
4) Remove the four
fixing screws of the fan
motor.
5) Then remove the fan
motor.
Fan motor connector
3
Electrical
parts
How to remove the
electrical parts.
1) After finish work of
item 1 and item 2, remove
the two connectors for the
compressor and the
reactors.
2) Pull out the two blue
wires connected with the
four way valve.
Two connectors
Four
screws
Two blue
wires of
four way
valve.