Midea MUE-36HRFN1-M(C) - New Cassette Indoor Unit Installation

165
14.2.6.5 Install the air duct
Please design the air duct as below
recommended picture
14.2.7 New cassette indoor unit
installation
14.2.7.1 Service space for indoor unit
Capacity (kBtu/h)
A(mm/inch)
H(mm/inch)
B(mm/inch)
24
204/8.03
>230/9.06
900/35.4
36
245/9.65
>271/10.7
48
287/11.3
>313/12.3
14.2.7.2 Bolt pitch
14.2.7.3 Install the pendant bolt
Select the position of installation hooks
according to the hook holes positions showed
in upper picture.
Drill four holes of Ø12mm, 12 cm
~15.5cm(4.7”-6.1”) deep at the ceiling hook
positions in the internal ceiling. Be
sure to hold the drill at a 90° angle to the
ceiling.
Using a hammer, insert the ceiling hooks into
the pre-drilled holes. Secure the bolt using the
included washers and nuts.
Install the four suspension bolts.
14.2.5.4 Install the main body
Make the 4 suspender through the 4 hanger of
the main body to suspend it. Adjust the