Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring
once.
1. Press " Kitchen Timer/Clock " twice to select clock function, the hour figures will flash.
2. Turn " " to adjust the hour figures, the input time should be within 0--23.
3. Press " Kitchen Timer/Clock ", the minute figures will flash.
4. Turn " " to adjust the minute figures, the input time should be within 0--59.
5. Press " Kitchen Timer/Clock " to finish clock setting. ":" will flash, and the time will
light.
NOTE
• If the clock is not set, it would not function when powered.
• During the process of clock setting, if you press " Stop/Clear ", the oven will go back
to the previous status automatically.
Microwave Cooking
1. Press " Micro./Grill/Combi. " the LED will display "P100".
2. Press " Micro./Grill/Combi. " for times or turn " " to choose the power you want,
and "P100", "P80" "P50", "P30"or "P10" will display for each added press.
3. Then press " Start/+30Sec./Confirm " to confirm, and turn " " to set cooking time
from 0:05 to 95:00.
4. Press " Start/+30Sec./Confirm " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1. Press " Micro./Grill/Combi. " once, the screen display "P100".
2. Press " Micro./Grill/Combi. " once again or turn " " to choose 80% microwave
power.
3. Press " Start/+30Sec./Confirm " to confirm, and the screen displays "P80".
4. Turn " " to adjust the cooking time until the oven displays "20:00".
5. Press " Start/+30Sec./ConfirmPress " to start cooking .
NOTE
The step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
To Next Page
Loading...
