Page 11
Operating
Instructions
NOTE
When the louver is horizontal, the unit
will have optimal cooling efficiency.
NOTE
During the network configuration
process, do not try using the remote
control or the controls on the front
panel of the air conditioner, as they will
be inoperative. You may use the remote
control and front panel buttons again
after the network configuration process
is complete (usually 8 ~ 10 minutes).
Timer: auto start/stop feature
Set the auto start/stop unit time
no matter what the unit is on or off.
Turning the unit ON or OFF at any time
will cancel the Auto Start/Stop timed
program.
Swing feature
Press the SWING button of the remote
controller for 2 seconds to start louver
auto swing feature. Short press the
button to use to change the louver
movement and set the desired air flow
direction.
WiFi feature
For the first time to use WiFi feature,
press the WiFi button for 5 seconds to
turn off the unit and initiate the WiFi
connection mode. The LED DISPLAY
shows “AP” for 1 second and off for 2
seconds alternatively to indicate you
can set WiFi connection. If connection
is successful within 8 minutes the
unit will exit WiFi connection mode
automatically and the WiFi indicator
illuminates. If connection fails within 8
minutes, the unit exits WiFi connection
mode automatically.
CAUTION
Never operate the louver manually.
To Next Page
Loading...
