pieces of connection wires and
connectors between IPM and
PCB.
CN1(5p,white)
CN14(3p,white)
CN3(red or brown)
CN5(blue)
15) Remove the IPM board.
16) Disconnect the
connectors and wires
connected from PCB and other
parts.
Connectors:
CN17:T3/T4 temperature sensor
(2p/2p,white)
CN7: Discharge temperature sensor
(2p,white)
CN15:T2B-A,B,C temperature sensor
(2p/2p/2p,white)
CN18/CN19/CN22: Electronic
To Next Page
Loading...
