Midea SBS Series - Compressor Case

Service Manual_2023-V2.0
34
This defrost heater with defrost sensor and fuse can be
dismantled separately, it DOES NOT need to replace the
evaporator assembly if only heater fail to work.
Defrosting fuse ①
Defrost sensor ②
Defrost heater ③
1）Disconnect the connecting terminals.
2）Cut off the band.
3）Use nipper plier to unlock all metal hooks of heater
pipe, separate the components from the evaporator.
7.9 Compressor case
Rear cover
1）Remove by cross screwdriver the screws fixing back
cover plate of compressor chamber anticlockwise
2）Take the back cover plate of compressor chamber
upward.
Piping and parts in the compressor case