11
How to Get the Drinking Water
Step 3: Installation
• Installation of water valve elements: Put the guide
projecting platform directed to the guide groove, after
that,push it downside with 45° slantly at full tilt, until
you hear a crack.
• Installation of seal ring of the water box: Put the seal
ring to the bottom of the water box, and be sure that
the seal ring is in place. Avoid wrinkle of seal ring and
it’s placement in wrong place.
•
The Installation of water box elements: Keep the
hanging slot of the water box elements direct to the
hangers on the door liner. The seal ring at the bottom of
the box shall directed to the entrance of the water valve
elements, insert it to the corresponding position along
with the 45° slantly.
To Next Page
Loading...
