11.5 Scenario 5
Only heating mode is available and there are multiple set points for the heating mode. (For more information, please read the
Engineering Data and see ''Multiple Set Points'' on Page XX in this document.)
The settings of multiple set points do not affect the main interface. The temperature of multiple set points is set through the
menu of the wired controller, while only the main room temperature is set on the main interface.
Note: The temperature of multiple set point 2 is lower than the temperature of multiple set point 1 and the temperature of
multiple set point 1 is lower than the temperature set on the main interface.
To Next Page
Loading...
