13.1.2 Weather Temperature Set
• WEATHER TEMP. SET=WEATHER TEMPERATURE
• On the WEATHER TEMP.SET page, you cannot set the desired water outlet temperature. The desired water outlet
temperature is calculated according to the outside ambient temperature. The higher the outside ambient
temperature, the lower the desired water temperature.
• During the operation of the weather temperature curve, you can set the shift value of the weather temperature curve
with the range of [-5,+5]. The shift value is the difference between the calculation value and the actual operation
value. Example: +5℃ indicates that the actual operation value is 5℃ greater than the calculation value.
• Take the following steps to set the weather temperature curve: MENU > PRESET TEMPERATURE > WEATHER TEMP.
SET. Press OK. The following interface is displayed:
To Next Page
Loading...
